Home Insulation Services in Columbia Station, OH

A customer in Columbia Station, OH was looking for solutions to insulating his almost 2,000 square foot attic. He was experiencing extreme heat loss in the winter and heat gain in the summer. This caused high energy bills and an uncomfortable environment. The homeowner found that Primary Home Improvements was his local, trusted insulation company and called to schedule a free estimate. 

The energy consultant met with the customer and evaluated the condition of the attic. He measured the R-Value as R-19. This is a very low R-Value for such a large attic space and home. R-Value is important in providing resistance to heat flow and air pockets. The energy consultant explained that blown-in fiberlgass would create a temperature-controlled and functional attic. 

On the day of install, the attic crew began by putting fiberglass into the high-powered blower machine. This machine breaks up the fiberglass so that it comes out fluffy and full inside of the attic. The installers then made sure to blow fiberglass all over the attic at a consistent R-49 insulating power. R-Value this high with a product this high-quality ensures that unwanted air cannot move through it and effect the entire home. This customer can now enjoy the benefits of attic insulation and can save up to 40% on heating and cooling bills! 

Do you have an attic that needs insulated? Call us today for a FREE estimate! 

A homeowner located in Columbia Station needed wall and attic insulation added to their 1945 home. They found that Primary Home Improvements was their local, expert insulation company and called to schedule a free in-home estimate. 

The energy consultant arrived to the estimate and made sure to thoroughly assess the attic and walls. In order to correctly evaluate the attic, the energy consultant climbed up into it and measured the R-Value there. R-Value is the measurement of how effective insulation is at stopping heat flow. This attic didn't have much R-Value, so there was not much stopping unwanted air from seeping into the home. To test the wall insulation, the consultant used a thermal gun. The thermal gun showed that the walls were a similar color as the outside air. This means that the lack of insulation in the walls is allowing outside air inside. The energy consultant explained that RetroFoam injection foam would be perfect for insulating the walls, while blown-in fiberglass would effectively insulate the attic. 

On the day of install, both the wall and attic crews arrived and got started on insulating the whole home! The wall crew began by taking one section of siding off around the whole home. They then drilled small holes between each wall stud and began injecting the foam. Each wall cavity was completely filled with RetroFoam and, once hardened, the injection foam will never settle! The siding is carefully put back on, as if we were never there, and installers made sure to clean up any access foam from the ground.

While that was happening, the attic crew was blowing R-49 fiberglass all over the 864 square foot attic. They made sure each inch of the attic was evenly filled with fluffy fiberglass. Once both crews were done, a final walkthrough was done and this satisfied customer was thrilled to have an entire home insulated in just one day! 

You too could benefit from whole home insulation- Give us a call today to schedule a FREE estimate!

A homeowner in Columbia Station, OH wanted a high-quality insulation that would not settle in his walls. He stopped by Primary Home Improvements booth at the Columbia Festival and scheduled a free in-home estimate on the spot! 

The energy consultant confirmed that the walls of this home needed insulated in order to effectively regulate the home's temperatures. The customer was scheduled an install date then and there. 

On the day of the project, the wall crew started by taking the siding off around the home. The great thing is, only one section of the siding around the house is required to take off. Once the siding was taken off, the installers drilled small holes between the studs of the wall and began injecting RetroFoam. RetroFoam is a tripolymer resin that fills every inch of the wall cavity. This injection foam will never settle and will keep a never-changing, high R-Value. Once the wall cavities were all full of injection foam, the installers plugged the wholes and carefully put back the siding. Cleanup was done to finish out the job and a final walkthrough was performed with the customer. This homeowner will now experience the cost savings and comfort of injection foam insulation! 

Do your walls need insulation? RetroFoam is a perfect fit for all existing homes. Call us today for a FREE estimate!